| Home |
| RTE Page |
| RTE/FXO Page |
| Wattmeter Watchers Page |
| A2T Audio Card Page |
Internet remote control and monitoring of Commercial Radio equipment
Have it BOTH WAYS! Use a wireline telephone return path for improved audio quality and latency (delay) or use your own Internet-derived ATA system without a wireline connection. The RTE/FXO is compatible with BOTH.
No need for a dedicated phone line. Since the RTE/FXO only answers when you have accessed your radio, it does not interfere with normal phone use.
No extra equipment to lug around when traveling. Operate WIFI when remote. Other solutions require remote hardware and a dedicated Ethernet line which may not be available in your hotel room, your friend's house, or your back porch. Just you and your laptop. From ANYWHERE
|
| Internet Radio Linking Made Easy |
But what remote station is complete if you can't monitor your output power?
ALL NEW WATCHERS : Local and remote RF power measurements with USB (local) or Ethernet connectivity
 For viewing of Analog RF wattmeters and RF sensors such as those made by Bird Electronic Company... |  Use USB or Ethernet Watchers for local | Remote It! |
|
USB Version ---------------------------------------------------------- Radio Control is available separately too so you may build your own systems. These are called RTE units. For audio, add the A2T card. The RTE/FXO is the combination of these two cards.Now! Direct Radio to Ethernet connection is possible without a PC !
 For ICOM transceivers with | Think of the RTE (Radio to Ethernet) cards as very, very long RS-232 or CI-V cables
To Order the RTE-CIV for only $149.95 click HERE
RTE-CI-V for Icom Use Glentek RTE (Radio To Ethernet) controllers for reliable and secure connections without a PC. No need for a CI-V adapter either! It's Built in! |
Remote It!Check out the RTE videos on the LINKS tab and below. |
 For Yaesu transceivers with |
To Order the RTE-232 for only $159.95 click HERE
RTE-232 for Yaesu (& Kenwood/Elecraft) radios Use Glentek RTE (Radio To Ethernet) controllers | Remote It!Check out the Youtube videos on the LINKS tab and below. Note: all RS-232 RTE models are the same and will work with any RS-232 controlled radio |
For Kenwood transceivers with |
To Order the RTE-232 for only $159.95 click HERE
RTE-232 for Kenwood (& Yaesu/Elecraft) radios  Use Glentek RTE (Radio To Ethernet) controllers ... and check out all the other remote control features of the amazing RTE series of cards: Eliminate Software PTT, PTT 3 minute timers, auto radio power turn on, antenna rotator control and many others.
| Remote It!Check out the Youtube videos on the LINKS tab and below. Note: all RS-232 RTE models are the same and will work with any RS-232 controlled radio |
NEW COMPLETE REMOTE CONTROL UNITS WITH 2-way Audio and Ethernet Radio Control
New! Complete Remote Control in one tiny box! | Combination RTE and A2T card in one box! This is ALL YOU NEED!!! Only 5 connections needed: 3 to the radio (SPKR, MIC, and CAT) 1 to the Ethernet jack 1 to the ATA FXS jack (VoIP) or RJ-11 telephone jack A quick peek inside | See the descriptive YouTube videos below.These units are in extremely short supply and we are not accepting orders on this website unless we have stock. As units become available, they will also be sold through our EBAY outlet. Visit WA9MVZ on EBAY (US and UK) Separate A2T units for our existing RTE users will be available shortly. ORDER: US$299.95 (RS-232)with case & mic cables ORDER: US$289.95 (CI-V) with case & mic cables US$249.95 caseless(RS-232) US$239.95 caseless (CI-V) To order RTE/FXO unit with case and microphone cable with CI-V output (ICOM) click HERE
|
Useful Links Tuesday, 12 May 2009 19:52
 Author: Administrator
Links
Last Updated ( Friday, 19 February 2010 20:02 ) |
AUDIO LINKING CARD Tuesday, 10 November 2009 15:15
Author: Administrator
Click HERE to read about the new companion audio card: the A2T The A2T will use TELCO connections either wireline or SIP enabled (with user supplied ATA) and WILL NOT REQUIRE A PC AT THE RADIO SITE +++Please note that the A2T is NOT a VoIP device. For internet connection an Analog Telephone Adapter will be required. +++ An example ATA for sale on EBAY is HERE Still in short supply, but now available. Simple connection to a wireline telephone line. Fully compatible with Fax machines and answering machines Uses the RTE ENABLE features and will tie up your phone line unless you have enabled your radio connection Fully compatible with internet VoIP services using the SIP protocol and ATA adapters so you don't need to use your wireline connection. Call a real phone number or a SIP number. Once enabled by the RTE, it answers so fast you probably won't hear your phones ring at all. The A2T will NOT answer unless enabled by accessing your radio. So use it on an existing FAX line or with your answering machines. Now you can be TOTALLY PC FREE !!!!
Last Updated ( Friday, 19 February 2010 20:03 ) |